Electrical 480/600 Volt Clamp On Circuit Breaker For Single Pole Mccb Tagout Lockout

Short Description:

M-K11, Can lock handle width ≦18 mm.

Small and medium clamp-on circuit breaker lockout, can lock circuit breaker with handle widths 18mm, it is recommend to be collocated with insulated safety padlock and safety tagout.

N-K12, Can lock handle width ≦42 mm.

Medium clamp-on circuit breaker lockout, and the lock cover above is fixed by split type, which is not easy to breaker. It is recommend to be collocated with insulated safety padlock and safety tagout.

M-K13, Can lock handle width ≦72 mm.

large clamp-on circuit breaker lockout, and the lock cover above is fixed by split type, which is not easy to break, it is recommend to be collocated with insulated safety padlock and safety tagout.

Send email to us

Product Detail

Product Tags

The lock body is made of reinforced nylon PA material with abrasion resistance, corrosion resistance, good insulation and temperature difference resistance(-50℃～+177℃), The product is durable and not easy to deform.
It is suitable for industrial power isolation area.

Electrical 480-600 Volt Clamp On Circuit Breaker F5

Structure design

The lock body has been upgraded and improved, and the lock cover is fixed with split type, which is not easy to break, opening and closing more smoothly and convenient to lock.
Cutter teeth bite design, less force on abnormal screw, but more tightly combined, not easy to loosen. Clamp type circuit breaker lockout is equipped with removable splint to enlarge the range of applicable circuit breaker.
Easy to install
The breaker lockout is installed without tools. Fix the lockout on the switch handle with special-shaped screws, and then fasten the stopper cover to the special-shaped screws to lock it so as not to loosen
Wide range of use
Through professional design, the product is suitable for a variety of medium sized built-in trip molded case circuit breakers to protect employees from electrical accidents during equipment maintenance.