-
Industrial Power Plug Lockout Qvand M-Q08 For 6-125a Industrial Plugs
Disconnect Industrial Plugs Lockout.
Suitable for 6-125A industrial waterproof plug. Applicable to all kinds of industrial waterproof plugs.
a) Made from engineering plastic ABS. Withstand temperature reach to – 57℃~+177℃, Shock resistance, anti-corrosion.
b) Compact, lightweight lock body for a wide range of industrial waterproof plugs.
c) Labels can be customized.
d) Many different industrial waterproof plugs can be locked without any tools.
e) Can be used with padlocks and hasps. The back self-adhesive track can be permanently fixed to the switchboard, simply clean the disk and paste it, without drilling.
f) Size: 38*48mm/37*54mm, lock the 35-85mm.
-
22mm Emergency Stop Lockout Qvand M-0q5 Electrical Push Button Cover
M-Q05G, height: 55mm, outer diameter: 55mm, inner diameter: 22mm
M-Q05GL, height: 32mm, outer diameter: 50mm, inner diameter: 30mm
M-Q06G: height: 43mm, outer diameter: 55mm, inner diameter: 30mm
M-Q06GL: height: 55mm, outer diameter: 55mm, inner diameter: 30mm
Transparent Emergency Stop Button Lockout, installation is divided into two types: disassembly button and disassembly free. Suitable for 22mm, 25mm, 30mm.
-
Gate Valve Lockout Covers Qvand M-07 Industrial Valve Safety Lock
Customized valve lockout M-Q07, hole diameter: 32mm, 46mm.
a) Made of transparent PC.
b) Once locked,prevent the valve from being turned.
c) The base allows use with semicircles to accommodate valve.
d) Accommodates valve up to 55mm diameter and 43mm tall.
e) Fits 32mm-46mm diameter valve.
-
Wall Switch Safety Lockout Qvand M-Q09 Push Button Protection Cover
M-Q10 The size of the mounting hole at the bottom of the lock is 74mm, length*74mm length width, it can be fixed with matching screws or 3M industrial glue on the emergency stop button switch, suggest to use it with engineering safety padlock and tag.
M-Q09 The size of the mounting hole at the bottom of the lock is 133mm length, *73mm width. It can be fixed with matching screws or 3M industrial glue on the emergency stop button switch, suggest to use it with engineering safety padlock and tag.
-
Cylinder Tank Gas Valve Lockout Device For Industrial Engineering Plastic Abs Safety Hand rod valve lock-Out
Suitable for the stem diameter ≤ 30mm.
Dimension: 30mm (Product code)*80mm (inner diameter)*25mm(Inner height).
The standing stock is red lock body, other colors and frosted transparent models need to be customized.
The whole product is metal-free for superior spark proof and chemical resistance. Resistant to cracking and abrasion extreme weather and temperature conditions.
It can equipped together with hasps and padlocks.
-
Pneumatic Quick-Disconnect Lockout Qvand M-Q17 Isolates Pneumatic Energy
Fire 12.13.16mm screwed joints.
Pneumatic Quick-Disconnect Lockout. The center hole of the lockout can be used to store the air hose, and the side can be used to hang the hose.
a) Made from engineering plastic nylon PA. It is durable and not easy to aging, extruded resistant, anti-bending and corrosion resistant, without auxiliary tools, more convenient.
The lock body and the button are made of engineering plastic reinforced nylon PA, which is resistant to corrosion, impact and temperature difference. Suitable for various operating environments, the lock body can be customized flame-retardant material.b) No need to install a straight interlock value, can b e isolated pneumatic power with lower cost and more convenient.
c) Hole in the center of the device allows permanent storage on the air hose and a loop on the side can be used to hang the hose and lockout device.
d) Can be equipped with padlocks, lock shackle diameter of 6.4 mm or 7.1 mm.
-
Steel Pneumatic Plug Quick Disconnect Lockout Qvand M-Q18 For Pneumatic Fitting
Air Source Lockout
Our pneumatic quick-disconnect lockout is applied to the male fitting, isolating equipment from.
All compressed air sources. Device accommodates the majority of 1/4”(6.4mm), 3/8”(9.5mm) and 1/2”(12.7mm) male fittings.
Hole in center of device allows for permanent storage on an air hose and a loop on the side can be used to hang the hose and lockout device.
Applied to the fitting and prevents it from being reconnected to pressurized air source. Fits virtually all pneumatic fittings used in manufacturing facilities.
Suitable for the air source contact diameter of 7-20mm.
-
Cylinder Tank Lockout Qvand M-Q20 Abs Pneumatic Lockout
The neck rings up to 35mm
1. Lock body material. The lockout is made of engineering plastic ABS material for one time injection molding. It has good comprehensive performance, high mechanical strength, good heat resistance, and good electrical insulation, it can be used for a long time in a more demanding chemical/physical. And max diameter inside 83mm. Prevents access to the main cylinder valve.
2. Accommodates neck rings up to 35mm, and max diameter inside 83mm. Easy and efficient installation to save you time.
3. Can be locked with 2 padlocks, lock shackle diameter up to 8.5mm. Lock with one padlock, lock shackle diameter up to 11mm.
4. Collocate. The lockout is used to lock the storage tank, including the suction tank on the forklift and the free-standing propane tank. The purpose of using safety locks and safety tags together with safety warnings to prevent miss operation.
5. On-site use. Cover the valve handle with the tank lockout locking device, and lock the personal padlock and locking label to ensure the safety of employees.
-
Warning Manhole Lockout Qvand M-Q25 For Accident Prevention Device
Size: 485mm(W)x420mm(H), cable lockout need to buy separately.
Manhole Lockout Bag,the hole pocket can pass through the ≥16mm side hole and can be locked with a padlock with a hole diameter of ≤7mm.
a) The product is made of high quality wear resisting polyester cloth and uses high-quality technology to make the product more durable in harsh environments.
b) With 5 meters cable lockout, can lock kinds of man hole.
c) Print warning sign on the surface, warning sign can be customized.
-
Industrial Pneumatic Plug Socket Lockout QVAND M-Q04 Industrial Electrical Plastic Plug Large Lockout
Polypropylene electrical plug lockout device is a simple solution for electrical equipment lockout Procedures.
It accommodates a large variety of plug shapes and sizes and some require a key to prevent unauthorized plug connection.
Size: 170mm x 97mm x 95mm, thickness is 5mm.
It can lock 5 kinds of pneumatic plug lockout with diameter:9mm, 10mm, 11mm, 12mm, 20mm.
Material: ABS material, refined processing. It is made from high strength engineering plastic ABS
high quality processing technology to make our products have more endurance.
-
30mm Push Button Switch Emergency Stop Lockout Qvand M-Q05 Safety Cover
M-Q05, hole diameter: 32mm, outer diameter: 50mm. inner diameter 22mm.
N-Q05L, hole diameter: 32mm, outer diameter: 50mm. inner diameter 22mm.
M-Q06, hole diameter: 43mm, outer diameter: 55mm. inner diameter 25mm.
a) Made of transparent glass resin PC. Using industrial 3M glue.
Visual management more safety, transparent raw material, easily and clearly to see the state of switch.b) Once locked, prevent the valve from being turned.
c) The base allows use with two semicircles to accommodate valve.
d) Accommodates valve. Up to 55 mm diameter and 43mm tall.
e) Fits 32 mm-46 mm diameter valve.
-
35mm to 85mm Safety Knife Switch Lockout QVAND Disconnector Lockout
Disconnect Lockout
Suitable for 35-85mm knife gate
a) The base is made of engineering plastic ABS and the main rod is made of nylon PA.
b) The back self-adhesive track can be permanently fixed to the switchboard, simply clean the disk and paste it, without drilling.
c) Lock the 35-85mm gate.
d) The red group bar indicates that the switch is off; green indicates that the switch is on.
